14
Protecting Your Digital Assets
TM
CRU Ditto Shark User Manual
•
Log Disk Info:
Determines whether S.M.A.R.T. and hdparm disk information is logged before
running an action, after running an action, both, or not at all. CRU recommends that you log disk
information before and after an action.
•
HTML Logging:
Logs are always saved in XML format. This option causes the Ditto Shark to save
logs in HTML format as well.
•
DiskView Logging:
Logs any action to preview a disk (i.e. creating a disk snapshot, starting or
finishing a HexView action).
•
Force SSL:
When enabled, this setting forces any browser to use HTTPS to access the Ditto Shark
Browser Interface.
•
PM Mirror Override
: Overrides the Ditto Shark’s check that tells you whether two devices
attached to the Ditto Shark can be mirrored. In some cases, attached devices may not appear as
mirrorable to the Ditto Shark because of the way their firmware implements RAID or port-multi-
plication (PM). This option gives you the ability to mirror any two devices you attach regardless of
these implementations. However, the attached devices must still be empty, so use the “Erase
Destination Disk” action from the “Home” screen if the devices are not empty (see Section 4.1.6)
before attempting to mirror them.
5.2 NETWORK
The “Network” tab allows you to view and customize the following settings. If you are unsure or have ques-
tions about changing your network settings, contact your network administrator. When you are finished,
click the
Commit Changes
button to save the changes.
5.2.1 Host Name
Allows you to change what name for the Ditto Shark will be displayed on a network. Host names are
not
case sensitive, but
must
begin with any letter “A-Z”. They can contain the the letters A-Z, numbers
0-9, underscore “_”, and dash “-” characters. Host names must also be limited to 64 characters.
Figure 18.
The “Network” tab on the “Configure” screen, showing the “Destination Network” and “Wifi
Network” settings. The “Wifi Network” section only appears when a USB wireless network adapter has been
plugged in.
