Crow PowerWave 8, Руководство пользователя

Страница: 11 / 22

11
How to Bypass Zones
Bypass any zone that cannot be closed. You can bypass selected zones prior to arming.
It is also used to temporarily exclude a faulty zone from service, which requires repair.
To bypass a selected zone, press < BYPASS >, the Ready Byp indicator and program
indicator lights up to indicate that the system is in bypass mode.
Enter the zone number one or more zones ,the zone LED indicators lights up to indicate
that the zone is bypassed ,following press < ENTER > , the Ready Byp LED flashes to
indicate zone(s) bypassed .
To un-bypass, press < BYPASS >, enter zone number, and < ENTER >.
Note : Disarming automatically un-bypasses zones.
How to use Chime (
If enable by Installer)
A Chime (Day zone) is a detector that can be part armed while you are at home but
working in another part of the building. It can be programmed to operate a buzzer or light to
let you know you have a visitor.
To disable this function, press < CONTROL > , Program LED and System LED indicators
lights up, press the < PROGRAM > , Program LED flashes to indicate that Chime is disabled
.
To enable Chime mode press < CONTROL > and < PROGRAM > again Program LED goes
off to indicate that Chime is enabled .
Emergency Alerts
This special key’s function is best programmed by your installer to suit your individual
situation. Most commonly it is used in a panic situation to sound only the outside siren and
perhaps call a monitoring station.
•
How to initiate Panic
Press the < PANIC > or Press simultaneously < 1 >and < 3 > .
• How to initiate Medical Alarm
Press simultaneously < 7 > and < 9 >.
•
How to initiate Fire Alarm
Press simultaneously< 4 > and < 6 >.