Crow PowerWave 8, Руководство пользователя

Страница: 19 / 22

19
At any stage, if you enter in an incorrect code you can press the “#” button on the remote
telephone to clear all code entries and then start again.
To turn on the optional Microphone (only available if the Voice Board is fitted) you must
enter in the appropriate code followed by the “*” button. To turn the Microphone off you
simply press the “*” button again.
To end a Telephone Control session simply hangs up the phone. The panel is monitoring
the line at all times and 15 seconds after the last key press it will automatically hang up the
line. This 15-second timer is active during the whole Telephone control process so a
period of 15 seconds without a key press will cause the panel to hang-up.
How Local control works
If a Telephone control code for outputs is programmed and the output/s are allowed to be
locally controlled from the keypad, then entering the 4 digit code at a keypad will blank the
display and the zone LED’s will now indicate the output status e.g. if output 1 is on zone 1
LED will be on. By now pressing the “1” button at the panel keypad, output 1 can be turned
off provided it is allowed to be locally controlled. To leave local Telephone control mode
simply press the <ENTER> button and the keypad will return to normal operation. This
feature works the same way that “Directly Controlling an Output” works (see page 14) only
it requires a code to access the function.