background image

20 

Warranty 

CROW LIMITED WARRANTY 

(Crow)  warrants  this  product  to  be  free  from  defects  in  materials  and 
workmanship  under  normal  use  and  service for  a  period  of  three  years 
from  the  last  day  of  the  week  and  year  whose  numbers  are  printed  on 
the printed circuit board inside his product. 
Crow’s  obligation  is  limited  to  repairing  or  replacing  this  product,  at  its 
option,  free  of  charge  for  materials  or  labour,  if  it  is  proved  to  be 
defective  in  materials  or  workmanship  under  normal  use  and  service. 
Crow shall have no obligation under this Limited Warranty or otherwise if 
the product is altered or improperly repaired or serviced by anyone other 
then Crow. 
There  are  no  warranties,  expressed  or  implied,  of  merchantability  or 
fitness  for  a  particular  purpose  or  otherwise,  which  extend  beyond  the 
description on the face hereof. In no case shall Crow be liable to anyone 
for  any  consequential  or  incidental  damages  for  breach  of  this  or  any 
other warranty, expressed or implied, or upon any other basis of liability 
whatsoever,  even  if  the  loss  or  damage  is  caused  by  Crow’s  own 
negligence or fault. 
Crow  does  not  represent  that  this  product  can  not  be  compromised  or 
circumvented; that this product will prevent any person injury or property 
loss  or  damage  by  burglary,  robbery,  fire  or  otherwise;  or  that  this 
product  will  in  all  cases  provide  adequate  warning  or  protection. 
Purchaser understands that a properly installed and maintained product 
can  only  reduce  the  risk  of  burglary,  robbery  or  other  events  occurring 
without  providing  an  alarm,  but  it  is  not  insurance  or  a  guarantee  that 
such will not occur or that there will be no personal injury or property loss 
or damage as a result. Consequently, Crow shall have no liability for any 
personal  injury,  property  damage  or  any  other  loss  based  on  claim  that 
this  product  failed  to  give  any  warning.  However,  if  Crow  is  held  liable, 
whether  directly  or  indirectly, for  any  loss  or  damage  arising  under  this 
limited  warranty  or  otherwise,  regardless  of  cause  or  origin, 

Crow’s 

maximum  liability  shall  not in  any  case  exceed  the  purchase price 
of this product, which shall be the complete and exclusive remedy 
against Crow. 

Содержание PowerWave 8























Отзывы: