Cromtech Brumby CTG3000i Скачать руководство пользователя страница 2

Страница: 2 / 44

Thank you for purchasing your Cromtech Brumby™

3.0kw portable petrol inverter generator.

This manual provides information of the operation and

maintenance of this generator. Please read this manual

carefully before operating machine.

For any questions regarding operation or maintenance,

please consult your local service agent.

IMPORTANT ICONS

Important information is distinguished by the notifications

below. The Safety Alarm Symbol (

) alerts you to

potential hazards. Please obey all safety information in the

symbol to avoid any possible injury or even death.

WARNING:

- The WARNING text indicates a

hazardous situation, which will lead to severe injury or

death if not avoided.

NOTICE:

The ‘NOTICE’ text indicates special

precautions to avoid damage to this machine or other

property.

NOTE:

The ‘NOTE’ text provides important

information to simplify operation.

WARNING: PLEASE READ AND UNDERSTAND THIS

MANUAL BEFORE OPERATING THE GENERATOR.

NOTE: The manufacturer of this generator

continually seeks advancements in product design and

quality. Therefore, there may be minor discrepancies in

actual machine and the printed manual.

NOTE: There may be changes for this generator

depending on the countries according to laws and

regulations in the area.

Pg. 2

Содержание CTG3000i













































Результаты поиска

Содержание CTG3000i

Отзывы:

Похожие инструкции для CTG3000i

Бренды по названию

Популярные бренды

Cromtech Brumby CTG3000i, Руководство пользователя

Результаты поиска

Содержание CTG3000i

Отзывы:

Похожие инструкции для CTG3000i

Бренды по названию

Популярные бренды