Cromtech Brumby CTG3000i Скачать руководство пользователя страница 7

Страница: 7 / 44

Pg. 7

OPERATION

(Full instructions pg. 22 to 30)

NOTE: When starting the generator after adding

fuel for the first time or after long term storage, or after

running out of fuel, turn the fuel valve to the ON position,

then wait for 10 to 20 seconds before starting the engine.

NOTE: Turn on the fuel valve.

Push the engine switch on the control panel to the

“ON” position (Refer to page 17).

2. Pull the choke lever out to the “START” position.

Pull the starter grip lightly until resistance is felt, then

pull briskly out. Repeat until the engine starts.

4. Push the choke lever back to the “RUN” position.

5. The green “RUN” light will illuminate when the

generator is ready for use before connecting any

loads.

Make sure that all appliances to be connected have

been switched off and are in good working order.

Confirm that the combined electrical rating of the

appliances does not exceed that of the generator.

Connect the appliance to the appropriate receptacle

on the generator’s control panel.

To minimize fuel consumption and noise, push the

economy switch to the “ON” position. This setting

regulates the engine’s speed so that it matches

the needs of the connected loads. Do not use the

economy setting if you are connecting items with

electric motors that have a high amperage draw

during startup, or with appliances that cycle on and

off rapidly.

SHUTDOWN

NOTE: In an emergency, pushing the engine switch on

the control panel to the “OFF” position will automatically

stop the engine with or without a load.

1. Turn off all connected appliances.

Push the engine switch on the control panel to the

“OFF” position.

Turn the fuel valve off.

Содержание CTG3000i













































Результаты поиска

Содержание CTG3000i

Отзывы:

Похожие инструкции для CTG3000i

Бренды по названию

Популярные бренды

Cromtech Brumby CTG3000i, Руководство пользователя

Результаты поиска

Содержание CTG3000i

Отзывы:

Похожие инструкции для CTG3000i

Бренды по названию

Популярные бренды