Cromtech Brumby CTG3000i, Руководство пользователя

Страница: 13 / 44

parts that can cause injury to persons;
• Check polarity of battery posts. A positive (pos, p,
+) battery post usually has a larger diameter than a
negative (neg, n, –) post;
• Determine which post of battery is grounded
(connected) to the chassis. If negative post is
grounded to chassis (as in most vehicles), see item
(v). If positive post is grounded to the chassis, see
item (vi);
• For a negative-grounded vehicle, connect the
positive (red) clip from battery charger to positive
(pos, p, +) ungrounded post of battery. Connect the
negative (black) clip to vehicle chassis or engine
block away from battery. Do not connect clip to
carburetor, throttle, fuel lines, or sheet-metal body
parts. Connect to a heavy gauge metal part of the
frame or engine block;
• Connect charger ac supply cord to electric outlet;
and
• When disconnecting charger, turn switches to
off, disconnect ac cord, remove clip from vehicle
chassis, and then remove clip from battery terminal.
CHARGING BATTERY OUT OF VEHICLE
1. Follow these steps when battery is outside vehicle. A
spark near the battery may cause a battery explosion.
To reduce risk of a spark near battery:
• Check polarity of battery posts. A positive (pos, p,
+) battery post usually has a larger diameter than a
negative (neg, n, –) post;
• Attach at least a 60 cm 6-gauge (awg) insulated
battery cable to a negative (neg, n, –) battery post;
• Connect the positive (red) charger clip to the
positive (pos, p, +) post of battery;
• Position yourself and the free end of cable as far
away from battery as possible, then connect the
negative (black) charger clip to free end of the
insulated battery cable;
• Do not face battery when making final connection;
• Connect charger AC supply cord to electrical outlet;
and
• When disconnecting charger, always do so in
reverse sequence of connecting procedure and
break first connection while standing as far away
from battery as practical.
2. The generator (stator winding) is isolated from the
frame and from the ac receptacle ground pin.
3. Electrical devices that require a grounded receptacle
pin connection will not function if the receptacle
ground pin is not functional.
Pg. 13