Cromtech Brumby CTG3000i, Руководство пользователя

Страница: 26 / 44

AC APPLICATION
!
NOTICE: Do not run generator for extended periods
with no load or minimal load (eg. when charging batteries
or powering low wattage equipment such as TVs and
Radios). This may cause premature spark plug failure,
excessive carbon build up or high oil consumption. To
prevent this, run the generator periodically with an
increased load.
1. Start the engine.
2. Make sure the digital display is illuminated, and returning
data.
3. Make sure the green RUN indicator LED is lit.
4. Confirm that the appliance to be used is switched off
before plugging into the control panel.
5. Plug the appliance into the control panel.
!
WARNING: Be sure that all appliances are in good
working order before connecting them to the generator.
If an appliance begins to operate abnormally, becomes
sluggish, or stops suddenly, turn off the generator
immediately. Disconnect the appliance and examine it for
signs of malfunction.
GENERATOR OVERLOAD
! CAUTION: Repeated, substantial overloading that
continuously illuminates the red overload indicator LED
may damage the generator. Marginal overloading that
temporarily causes the overload indicator LED to illuminate
may shorten the service life of the generator.
The digital display will remain illuminated and returning
data during normal operating conditions.
12V
Pg. 26