Crestron FT-TSC600 FlipTop, Руководство по эксплуатации и установке

Страница: 39 / 48

Crestron FT-TSC600 FlipTop Touch Screen Control System
Operations & Installation Guide – DOC. 7593A FlipTop Touch Screen Control System: FT-TSC600 • 35
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs, projects, or firmware) can be transferred to the control system (or device).
Finally, program checks can be performed (such as changing the device ID or
creating an IP table) to ensure proper functioning.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Service Providers (CSPs) only. New users must register to
obtain access to certain areas of the site (including the FTP site).
While the next section provides an overview for communication, refer to
“Establishing Communications with the Control System” in the 3-Series Control
Systems Reference Guide (Doc. 7150) for connection details. If communications
cannot be established, refer to “Troubleshooting Communications” in the same
guide.
Establishing Communication
Use Crestron Toolbox for communicating with the FT-TSC600; refer to the Crestron
Toolbox help file for details. There are two methods of communication: USB, and
TCP/IP.
USB
NOTE: Required for loading projects and firmware.
USB Communication
PC Running
Crestron Toolbox
USB
FT-TSC600
The COMPUTER port on the FT-TSC600 connects to the USB port on the PC via
the included Type A to Type B USB cable:
1. Click Tools | System Info .
2. Click the
icon.
3. For Connection Type , select USB . When multiple USB devices are
connected, identify the FT-TSC600 by entering “FT-TSC600” in the
Model
text box, the unit’s serial number in the Serial text box or the unit’s
hostname (if known) in the Hostname text box.
4. Click OK . Communications are confirmed when the device information is
displayed.