Crestron FT-TSC600 FlipTop, Руководство по эксплуатации и установке

Страница: 5 / 48

Crestron FT-TSC600 FlipTop Touch Screen Control System
Operations & Installation Guide – DOC. 7593A FlipTop Touch Screen Control System: FT-TSC600 • 1
• Flush mount tabletop control and connectivity in one stylish FlipTop
design
• Built-in 3-Series control processor
• Onboard 10/100 Ethernet and Cresnet
®
master ports
2
• Control port expansion via C2N-IO modules (sold separately)
•
Integrated 5” capacitive color touch screen with Smart Graphics™
support
3
FlipTop Touch Screen
Control System: FT-TSC600
Introduction
The FT-TSC600 FlipTop™ Touch Screen Control System by Crestron
®
provides a
configurable control and connectivity solution in a stylish, flush mount tabletop
design. Its built-in 3-Series
®
control processor and brilliant 5” (127 mm) color touch
screen combine to deliver a complete, space-saving controller for any small
conference room or similar space. The built-in connection compartment keeps
interface cables and connectors at the ready for plugging in laptop computers, mobile
devices, AV sources, and other equipment.
A FlipTop Touch Screen Control System is an ideal complement to a
DigitalMedia™ system or any other AV system. It provides an intuitive and inviting
“front end” for the more complex and mundane technology beneath the tabletop and
throughout the room. The integrated touch screen and control processor can provide
total control for an entire room, offering a fully customizable user interface for
selecting presentation sources, adjusting audio levels, dimming the lights, and even
calling for lunch service. Advanced capabilities include displaying full-motion video
and hands-free audio conferencing
1
.
Features and Functions
(Continued on following page)
1. Supports audio conferencing with another Rava-enabled device over an IP network, or with any
telephone device through integration with a SIP-compatible phone system or SIP server.
2. To supply Cresnet power via the
NET
port, the FT-TSC600 must be powered using an IEE 802.3at
Type 2 PoE+ PSE (Power Sourcing Equipment). If the FT-TSC600 is powered by an 802.3af or
802.3at Type 1 Poe PSE, no load should be connected to the 24 terminal of the NET port, and an
external Cresnet power supply must be used to power any attached dev ices that require Cresnet
power.
3. Supports Smart Graphics only. Not compatible with “traditional” UI projects.