Crest Electronics CDVS-7000, Руководство пользователя, Страница: 98 / 119

5-3
Click the Option button to bring up the PTZ Environment Settings screen. The following is an
overview of the PTZ environment settings screen.
Select PTZ Camera
Use PTZ
Select PTZ Protocol
Enter camera’s address
Select PTZ Camera’s
communication type
Set Baud Rate
Save Cancel Close
• Select PTZ Camera - Select the camera port where the PTZ Camera is connected.
• PTZ Use - Check box to turn on PTZ function.
• Select PTZ Protocol - Select the PTZ Camera’s protocol type from the drop down menu.
• Address - Enter the PTZ Camera’s address, (See PTZ camera manual for information on
setting the PTZ camera’s address).
• Comm Type - Enter the type of communication the PTZ Camera uses (422/485 or RS-
232).
• Baud Rate - Enter the baud speed that the PTZ Camera’s data port operates.
• Save - Click to save settings.
• Cancel - Click to cancel and return to the PTZ controller.
• Close - Click close to return to the PTZ controller.
• Preset Reserved - Click this Tab to go to the Preset Tour setup screen.