Crest Electronics CDVS-7000, Руководство пользователя, Страница: 75 / 119

4-6
Sensor to Relay Link
This screen is a display telling the user what relays are associated with each sensor. It is not very
practical, but it is possible to have all relays associated with one sensor or have all sensors asso-
ciated with all relays. To associate a relay with a sensor, follow these steps:
1). Click the sensor to link to a camera; it will highlight in white indicating it is selected.
2). Click the relay or relays you want associated with the selected sensor. Each relay selected will
highlight in white and the sensor to relay link screen will display your links. X = not linked O =
linked.
Sensor Name
The system allows the user to rename the sensor. To rename the sensor, highlight the current
name and begin typing. The old name is overwritten with the new sensor name.
Copy to All
User can apply the selected sensor setting to all sensors.
Copy to Selected
User can copy selected sensor settings to selected sensors. To select other sensors, hold down the
control (CTRL) button on the keyboard and click the sensor or sensors desired.
Apply Button
Use the Apply button to save the changes without exiting the setup screen. You can then go to
another setup menu without exiting the setup window.
Save and Close Button
Use the save and close button when you have finished making changes and want to exit the setup
window.
Cancel
The cancel button is used to exit the setup screen without saving any changes. If you click the
apply button before clicking the cancel button only the changes made after clicking the apply
button will be canceled.
PTZ Preset
The PTZ Preset function gives the system the ability to have a PTZ camera move to a preset loca-
tion when the sensor is activated. Only one preset can be assigned to each sensor. To use the PTZ
Preset function select the sensor which will activate the PTZ Preset. Then select the PTZ camera,
followed by the preset position you wish to call. See Image below.
Select camera with
PTZ preset
Click use, select PTZ camera;
then select preset location
number