Crest Electronics CDVS-7000, Руководство пользователя, Страница: 79 / 119

4-10
Sensor Recording
Sensor alarm only records video for cameras set up for and linked to sensors. Recording begins
when sensor is activated and continues for duration of alarm. This recording mode is used when
the user only wants to record video when there is a sensor activation. It is possible to set by hour
or day. To activate sensor recording use the following instructions. 1). Select camera or cameras.
2). Click the SR (S) radio button. 3). Click and drag the mouse icon in the recording schedule
grid to select the days and hours for operation. If user wants to select all, click the blank square
in the upper left corner of the recording grid. Day and time selected will display in Red with the
R symbol indicating they have been selected. If all cameras are to record the same, click copy to
all. To repeat setup on selected cameras hold the control key (CTRL) on the keyboard and select
cameras to copy settings to, then click copy to selected .
Motion Recording
Motion recording records video only when motion is detected. Cameras where there is no motion
will not be recorded. This is the most used method of recording, as the system does not record
until there is motion in the selected areas (see motion area setup). It is possible to set by hour or
day. To activate motion recording use the following instructions. 1). Select camera or cameras.
2). Click the MR (M) radio button. 3). Click and drag the mouse icon in the recording schedule
grid to select the days and hours for operation. If user wants to select all, click the blank square
in the upper left corner of the recording grid. Day and time selected will display in yellow with
the M symbol indicating they have been selected. If all cameras are to record the same, click
copy to all. To repeat setup on selected cameras hold the control key (CTRL) on the keyboard
and select cameras to copy settings to, then click copy to selected .
Motion and Sensor Recording
Motion and sensor recording combine both motion and sensor recording. If a camera has a sensor
or motion event the system will record video. It is possible to set by hour or day. To activate mo-
tion and sensor recording use the following instructions. 1). Select camera or cameras. 2). Click
the M+S radio button. 3). Click and drag the mouse icon in the recording schedule grid to select
the days and hours for operation. If user wants to select all, click the blank square in the up-
per left corner of the recording grid. Day and time selected will display in orange with the M+S
symbol indicating they have been selected. If all cameras, are to record the same, click copy to
all. To repeat setup on selected cameras hold the control key (CTRL) on the keyboard and select
cameras to copy settings to, then click copy to selected.