Crest Electronics CDVS-7000, Руководство пользователя, Страница: 80 / 119

4-11
Recording Example:
The following example will detail setting up cameras 1 & 4 for Continuous recording, camera
3 for sensor recording, cameras 2,5,6,7 for motion recording, and camera 8 with no recording at
9:00am and motion recording the rest of the time.
To begin, camera one should be highlighted. If it isn’t, do so now. We are going to set camera
one and four to record in continuous mode. 1). Now we need to select camera four. We do this by
holding down the control button (CTRL) on the keyboard. This will select both camera one and
four (they are highlighted in white). 2). We need to set the recording mode to continuous mode.
Do this by selecting the radio button CM (C). 3). We now will set the days and time for record-
ing these cameras in continuous mode. Because we want these cameras to record everyday, 24
hrs a day, we will click in the upper left corner of the day and time schedule grid. The entire grid
will turn green and every hour will have a C indicating continuous mode as the image below
shows.
recording selection grid
green with mode as C
camera 1&4 selected
continuous mode selected
Now we need to set camera three for sensor recording. 1). Select camera 3. 2). Click sensor radio
button to select sensor recording click and drag to select the entire schedule selection grid. Grid
will turn red with each hour displaying S indicating sensor recording mode. See image below.
camera 4 selected
sensor recording selected
record schedule grid
red with mode as S