Crest Electronics CDVS-7000, Руководство пользователя, Страница: 45 / 119

3-15
We now want to set our camera mode to select only cameras 1 and 5. To do this we click the X
button in the Camera/Mode Selection Screen and click on camera numbers 2, 3, 4, 6, 7, and 8.
This places an X under the camera numbers we do not want to record. The image below shows
the camera mode selection screen with these changes made.
select X to not back up
click to open camera mode
selection screen
Click camera number to change from O to X
After selections are made, we are now ready to back up. Push the record button and the system
starts the backup process.
Important note: When backing up make sure that the device you are backing up to has enough
free space to hold your backup. To see how much space is needed, look at the Selected data
screen which will tell you in KB how much data you have selected to back up.To convert KB
into MB, divide KB by 1024. The average CD-R or CD-RW can hold about 400 MB or 409,600
KB. This will leave space for copying the 7000 series backup player software to the disk (ap-
proximately 8.2 mb).
amount of data selected to be backed up.
Caution: Do not reinsert the CD into the DVR after the backup program has finished writing
the back up files and ejected the disk. Doing so will cause the install program to run. This could
cause problems with the DVR program. If you do this remove the CD and restart the DVR pro-
gram.