Crest Electronics CDVS-7000 Скачать руководство пользователя страница 2

Страница: 2 / 119

Caution

This installation should be performed by qualiﬁed service personnel and should conform to all Federal, State

and local laws.

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates and uses radio

frequency energy, and if not installed and used in accordance with instructions, may cause harmful

interference to radio communications. However, there is no guarantee that the interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one of the following methods:

- Relocate the receiving antenna

- Increase the amount of space between the equipment and the receiver.

- Connect the equipment to an outlet which is on a separate circuit than that of the

receiver.

- Consult the dealer or an experienced radio/TV technician for help

CAUTION:

Changes or modiﬁcations not expressly approved by the party responsible for compliance

with the FCC Rules could void the user’s authority to operate this equipment.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK. DO NOT REMOVE COVER. NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning ﬂash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufﬁcient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE

Содержание CDVS-7000
























































































































Результаты поиска

Содержание CDVS-7000

Отзывы:

Crest Electronics CDVS-7000, Руководство пользователя, Страница: 2 / 119

Результаты поиска

Содержание CDVS-7000

Отзывы: