Crest Electronics CDVS-7000, Руководство пользователя, Страница: 77 / 119

4-8
Apply Button
Use the Apply button to save the changes without exiting the setup screen. You can then go to
another setup menu without exiting the setup window.
Save and Close Button
Use the save and close button when you have finished making changes and want to exit the setup
window.
Cancel
The cancel button is used to exit the setup screen without saving any changes. If you click the
apply button before clicking the cancel button, only changes made after clicking the apply button
will be canceled.
The following relay types are available:
Manual Operation: Sends a signal when either a sensor or motion event occurs. System will
continue to send signal until user clicks the activated relay in the sensor/relay display box in
the main screen (live mode).
Sensor Alarm Operation: Sends a signal when the sensor alarm is activated. The relay will
continue to send signal for as long as sensor is activated.
Set Time Operation: Sends a signal when either a sensor or motion event occurs. System
will send a signal for the time set in the minute and second time setting box.
Motion operation:Relay will send signal when motion is detected and camera and recording
schedule are set for motion recording. Relay starts when motion is detected and stops when
motion is finished.
Relay Link to Camera Grid Box
The relay to camera grid box shows the link between a specific camera and the system relays. All
relays can be linked to one camera or all cameras. To create a link to a camera, click the relay to
be linked. Then click the camera or cameras you want linked to the relay. The grid box will re-
flect the camera links. O represents a link between a camera and a relay. X represents not linked.
Minute and Seconds Timer Boxes
The minute and seconds timer boxes allow the user to set the amount of time the relay will send
signal when relay is activated and relay type is set to manual.