cressi.com
Alarms setting.
To set the alarm type in the Set Time menu once the alarm time has been reached it is necessary to
continue pressing the Up button until the "AL" stops flashing. Now press the MODE button. The alarm
mode set will appear. Press the UP or DOWN button to change modes. The alarm mode will be as follows:
Daily: To make sure that the alarm sounds each day.
Once: To make sure that the alarm sounds once only. Off: The alarm is switched off.
UNDERWATER COMPUTER ACTIVATION
Access to the underwater computer from the watch function can occur in two ways. The first is just a long
press on the MODE button and then the message DIVE appears on the display and then after releasing it,
the PRE DIVE screen of the set program (Free, Pro, Dynamic and Static). In the second mode, it is
necessary to scroll through the menu with the UP or DOWN button until the DIVE menu and then press the
MODE button. DIVE will appear on the display and then immediately the PRE DIVE screen of the set
program (Free, Pro, Dynamic and Static).
WARNING: When diving, Drake does not automatically switch from watch function to underwater
computer function and then, before entering the water, it is recommended to activate it manually. If
you were already immersed, activate it by holding it for a moment out of the water.
ACCESS TO DIVE COMPUTER
1:
2:
TIME DISPLAY
LONG
TIME DISPLAY
TIME DISPLAY
AFTER 2’’
AFTER 4’’
ALARM SET
SET TIME DISPLAY
7
