cressi.com
DIVE
READY TO DIVE
READY TO DIVE
SURFACE
SURFACE
SURFACE
SURFACE
SURFACE
MANUAL
ON
MANUAL
STOP
SURFACE
PRE-DIVE
PRE-DIVE
STATIC MODE DURING FREE DIVE SESSION
DIVE NUMBER
TEMPERATURE
TIME
LAST TIME CHRONO
RESET
RESET
FROM DIFFERENT
COMPUTER MODE
(PRO, FREE, STATIC)
STATIC PROGRAM.
Program for static diving dedicated to athletes who want to practice the discipline or those who
just want to train to improve their performance. Its special display shows in the central part the most
important information at that moment, alternating the diving time to the recovery time. It must be operated
manually as a standard depth is not defined for which it is considered a static diving. Some athletes are on
the water's surface while others are just a few centimetres deep. It is therefore necessary to manually
activate the chronometer at the beginning of the diving and stop it at the end so that the computer starts to
count the recovery time. The display also shows the depth. In the bottom, it is possible to scroll through the
secondary data and leave the one you want.
When the STATIC program is set, the display shows the following information:
On surface.
- At the top right: Time of last diving.
- At the top left: Current depth.
- At the centre: Surface or recovery time.
- Scrolling with UP or DOWN buttons at bottom: number of diving and water temperature, time, last
chronograph information and reset to restart and carry out a new session.
When diving.
- At the top left: Current depth.
- At the centre: diving time
- At the bottom: chronograph for the diaphragmatic contractions.
Always visible:
- Acoustic alarms icon activated.
- REPS icon activated.
How to use the STATIC program.
Once in the program, it must be operated manually by pressing the Mode button at the beginning of the
diving. After diving, and when re-emerging, to stop the time, press again the Mode button. The computer
will start to count the recovery or surface time until you press again the MODE button for subsequent
diving. Then, the time of the second diving will be counted. So on the times you want. To stop the computer
counting and start a new session, press the UP button repeatedly until the word RESET appears at the
bottom of the display. Press MODE and the computer will reset.
During diving Drake is able to measure the time, in minutes and seconds, from different times to the total
time of diving, such as the time between the diaphragmatic contractions.
WARNING: Before using the Drake underwater computer, it is recommended to take a diving
course at a serious and accredited school.
WARNING: Diving is an underwater discipline that definitely is not as simple as it might seem.
Before you engage in this activity you must know in depth all the physiological, physical and
chemical aspects. It is also fundamental that you have a deep knowledge of the underwater
medical point of view. DANGER: Before performing the test of static diving, make sure to be
followed by a person on the edge of the tank who is ready to intervene in case of need. It is also
recommended, during diving, to move a limb or a finger to ensure that the surface mate becomes
immediately aware of a possible loss of consciousness.
DIVE
DIVE
DIVE
DIVE
DIVE TIME + CHRONO READY
DIVE TIME + CHRONO ON
DIVE TIME + CHRONO STOP
DIVE TIME + CHRONO RE-ON
MANUAL
ON
11
