cressi.com
MENU SET TIME
Date and time adjustment.
Press the UP button until you see TIME SET mode on the display, then press the Mode button. The digits
of the time (t1) start flashing in the lower part of the dial. Press the UP or DOWN button to pass to the
indicators of minutes, of the secondary time (t2), of the alarm (AL), of the year, month, day and the setting
of 12/24 hours. Scroll up to the desired setting and press the Mode button. The display shows just the
highlighted item, flashing. Change it by pressing the UP or DOWN button. Confirm the value set by
keeping the Mode button pressed for a few seconds until hearing an acoustic signal to confirm exit from
the menu. Keep pressing and holding the Mode button to return to the main menu (after another acoustic
signal) Alternatively, after the last time the buttons are pressed, the computer will modify the automatic
setting by issuing an acoustic signal to return then to the main screen, and then it will automatically shut
down.
REMARK:
To store exact information in the computer logbook, remember to check for correct time and
data settings.
SWAP function: swap the main time T1 with the secondary time T2.
When travelling, it is necessary to store data of the computer using the time zone of the place but at the
same time it is possible to also see the time at the place of origin. This need is strongly felt especially by
those who go several times to the same foreign country.
The SWAP function allows the exchange of times T1 (main) and T2 (secondary) so the computer records
our dives in the foreign time and at the same time it is possible to keep aware of our time of origin.
To activate this function, press the UP button until "T1" or "T2" flash, and then press the Mode button.
"SWAP" will appear on the display to confirm that the time has been changed. Hold down the Mode button
for a few seconds until hearing an acoustic signal to confirm the exit from the menu. Keep pressing and
holding the Mode button to return to the main menu (after another acoustic signal) Alternatively, after the
last time the buttons are pressed, the computer will modify the automatic setting by issuing an acoustic
signal to return then to the main screen, and then it will automatically shut down.
6
SET TIME: TIME 1
SET TIME: TIME 2
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
SET TIME: SWAP TIME 1 WITH TIME 2
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
