cressi.com
SETTING AUTOMATIC LIGHTING FOR PRO PROGRAM.
Sometimes, when visibility is poor, it will be necessary to illuminate the display. Drake offers the possibility
to illuminate automatically after reaching a certain depth. To set the automatic lights scroll with UP or
DOWN buttons until the ALARMS menu. Enter the menu by pressing the MODE button. The numbers in
the top left of the display below the TR indicator will flash. Press the UP or DOWN button until the word
LAMP on the bottom right flashes. Press the MODE button again. The flashing word OFF will appear on
the display. Press the UP or DOWN button. The flashing word ON will appear and next to it, the indication
of depth. Press the MODE button to select the figures of the depth to start flashing. Press the UP or
DOWN buttons to change the depth value. Confirm the activation by holding down the Mode button for a
few seconds until hearing an acoustic signal to confirm the exit from the menu. Alternatively, after the last
time the buttons are pressed, the computer will modify the automatic setting by issuing an acoustic signal
to return then to the main screen, and then it will automatically shut down.
WARNING: The automatic setting of the display lightening consumes considerable battery. It is
recommended to add it only when absolutely necessary.
DEPTH TO STEP ALARM SETTING FOR PRO PROGRAM.
This alarm is particularly suitable for those who practice deep diving. The step alarm is a depth alarm that
is repeated at every time a predetermined value in metres is passed. For example: By setting the STEP
alarm to 5 we will be notified whenever the depth reaches a multiple of 5. That is 5, 10, 15, 20, etc.
To set the STEP alarm scroll with UP or DOWN buttons until the ALARMS menu. Enter the menu by
pressing the MODE button. The numbers in the top left of the display below the TR indicator will flash.
Press the UP or DOWN button until the word STEP flashes on the bottom right. Press the MODE button
again. The flashing word OFF will appear on the display. Press the UP or DOWN button. The word ON will
appear and next to it on the left, the indication of the depth (5, 10, 20 metres). Press MODE. The depth will
flash. Press the UP or DOWN buttons to change the depth value. Confirm the activation by holding down
the Mode button for a few seconds until hearing an acoustic signal to confirm the exit from the menu.
Alternatively, after the last time the buttons are pressed, the computer will modify the automatic setting by
issuing an acoustic signal to return then to the main screen, and then it will automatically shut down.
To indicate the alarm entered, an icon appears with the numbers 5 and 1 overlooking the two small waves.
When there is the number 5 with the two wavelets, the alarm will sound every 5 metres. When there is the
number 1 with the two wavelets, the alarm will sound every 10 metres. When only two wavelets are
present, the alarm will sound every 20 metres.
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
ALARMS: SETTING AUTOMATIC LIGHTING FOR PRO PROGRAM
ALARMS: DEPTH TO STEP ALARM SETTING FOR PRO PROGRAM
STEP EACH 5m :
STEP EACH 10m :
STEP EACH 20m :
16
