cressi.com
LAP COUNTER ALARM FOR DYNAMIC PROGRAM AND FREE DIVING COUNTER ALARM FOR
STATIC PROGRAM. REPETITIONS COUNTER FOR DYNAMIC AND STATIC PROGRAMS.
Lap counter alarm for the DYNAMIC program and free diving counter alarm for the STATIC program. When
Drake is set with the DYNAMIC program, the display is adapted to the practice of dynamic free diving and
often in this field, the so-called "repetition" is performed and that is, the path repeats, in an alternating
mode, the tanks of the pool in free diving and swimming at the surface or only in diving.
During this training one of the most important things to keep in mind is the number of laps covered in free
diving. In fact, we often try to increase this value at the same time to increase the performance.
Drake can store the number of tanks that we intend to follow, and when this number is achieved, report it
with a visual or visual-acoustic notice.
To set the lap counter alarm, it is necessary to go into the DYNAMIC program and scroll with UP or DOWN
buttons until the ALARMS menu. Enter the options of this menu by pressing the MODE button. The two
digits at the top left below the message MAX will flash. Scroll with the UP or DOWN buttons until the
indicator of the lap counter of the tanks or the paths on the left side of the central part of the display and
marked with the words DIVE MAX (this value must flash). Enter with the MODE button and change the
value with the UP or DOWN buttons. Confirm the set value by holding down the Mode button for a few
seconds until hearing an acoustic signal to confirm the exit from the menu. Alternatively, after the last time
the buttons are pressed, the computer will modify the automatic setting by issuing an acoustic signal to
return then to the main screen, and then it will automatically shut down.
In the STATIC program, the diving counter alarm is reached in the same way with the difference that the
counter is always on the left in the dial but in the lower part, and it is marked by a gate.
Repetitions counter for DYNAMIC and STATIC programs.
When the REPETITIONS REPS function is activated (see next chapter) the lap counter or diving counter
acts at the same time and logically from the counter or multiplier the increases or decreases in repetitions.
This means that the alarm times increase or decrease the number of times indicated in this counter.
ALARMS: LAP COUNTER ALARM OR REPETITIONS COUNTER FOR DYNAMIC MODE
ALARMS: FREE DIVING COUNTER ALARM OR REPETITIONS COUNTER FOR STATIC MODE.
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
IF REPETITION IS ON,
DIVE RUN COUNTER
MEANS HOW MANY
TIMES INCREMENTS
REPEAT
IF REPETITION IS ON,
DIVE COUNTER
MEANS HOW MANY
TIMES INCREMENTS
REPEAT
19
COUNTDOWN
TIMER
NORMAL
TIMER
NORMAL
TIMER
SWAP
ALARM
STATIC DIVE WITH
DIVE TIME ALARM
MANUAL
ON
