Creo Color Controller C-80, Техническое руководство

Страница: 80 / 150

64 Chapter 4—Diagnostics and Troubleshooting
Control Menu
Level Menu
Help Menu
Run Initiates a test session, after the items for testing in this
session are marked in the check boxes. When
Loop Off is
selected, the test session terminates after each test has
been executed. When
Loop On is selected, the loop
sequence is toggled on and the test session repeats until
the loop termination condition is reached.
Run Until Fail Initiates a test session, after the items for testing in this
session are marked in the check boxes. When
Loop Off is
selected, the test session terminates after each test has
been executed or until the first failure is detected by any
test, whichever comes first. When
Loop On is selected, the
test session repeats until the loop termination condition is
reached or once a failure is detected, whichever comes
first.
User The default setting for the diagnostic testing and operations
on the diagnostic tree that provides indications regarding
faulty field replacement units (FRUs).
Online Help Loads the HTML page that has access to all the topics
below.
JOIND
Components
and GUI Introduction to the Color Controller C-80 Remote Support
concept and describes the JOIND components and GUI.
Activating the
JOIND Describes the access modes Remote Support and how to
run them.
The JOIND
Main Window Describes the JOIND main window, menus and options.
The JOIND
Menu Options Description of the menu and sub-menus.
DFE Not applicable.
About JOIND Displays the JOIND version number and date.