Creo Color Controller C-80, Техническое руководство

Страница: 114 / 150

98 Chapter 5—Hardware and Maintenance Repairs
5.5 Working with Boards (Adapters)
If the diagnostics check (see Chapter 4, Diagnostics and Troubleshooting ) indicates
that any unit components need replacing, follow the replacement procedures.
Figure 12 illustrates schematically the external connectivity of the peripherals and
the internal connectivity of the main components of the Color Controller C-80.
Figure 12: Peripherals and internal connectivity
5.5.1 Visual Inspection
Whenever you replace any component in the unit:
1. Check that all boards are retained properly in their slots.
2. Check that the cables are routed properly.
3. Check the existence of all the fans.
4. Check that all the disks are locked properly.
5.5.2 Replacing the FusionRA Board
The FusionRA board simultaneously decompresses and RIPs data for the duration
of a job. Perform the following procedures to remove and install the FusionRA board.
WARNING: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details, see Safety Information
(Multi-Language) on page v.