Creo Color Controller C-80, Техническое руководство

Страница: 29 / 150

13
3. In the Computer name box, type the new name for the Color Controller C-80. If
you want to change the workgroup or the domain in which your computer
appears, type the new name in the corresponding box and click
OK .
A message appears to inform you that changes will take effect only after
restarting the Color Controller C-80.
4. In the System Properties dialog box, click OK.
Setting the Date and Time
1. In the Date & Time tab, verify that the date and time are set correctly. If they are
correct, proceed to Configuring the Network Setup on page 14.
2. If you want to change the date and time, set the correct date and time, and then
select the Time Zone tab.
Attention: Do not modify the Workgroup or Domain in the following step unless
instructed to. If you do change the workgroup or domain, verify that you have the
correct user name and password for the workgroup or domain.
Note: When prompted to restart your
Color Controller C-80
, click
No
.