Creo Color Controller C-80, Техническое руководство

Страница: 74 / 150

58 Chapter 4—Diagnostics and Troubleshooting
19. Using the arrow keys, select Exit Saving Changes and press
ENTER
.
20. To view the BIOS setup utility Setup Utility summary window in detail, when the
system starts or restarts and the window appears, immediately press
PAUSE
BREAK
on your keyboard.
21. Press any key to continue.
You have completed Configuring the Computer BIOS.
Configuring the Gigabit Ethernet Controller
You do not need to set any jumpers or configure the controller. The device driver that
enables the operating system to address the controller is automatically installed
from DVD #1 (Fast Install SLP).
4.2 General Diagnostic Tools
The following tools are available to help you identify and resolve hardware-related
issues:
•
PC health monitoring
•
POST (Power-On Self-Test) beep codes, error messages, and error logs—
POST generates beep codes and messages to indicate successful test
completion or the detection of a problem.
For more information, see POST (Power On Self Test) on page 59.
4.2.1 PC Health Monitoring
This section describes the PC health monitoring features of the system board. The
system board has an onboard system hardware monitor chip that supports PC
health monitoring.