D I A M A N T
Pro
37
Original instructions.
USER PROGRAMMING
3. Use the
▲/▼
arrows to
adjust the temperature
setting. Then use the
to confirm the new
temperature. Use the
X
to
exit.
1. Press the Temperature
Adjustment button to enter
the programming menu.
2. Use the
</>
arrows to
scroll to the boiler to be
programmed.
℃
℃
℃
℃
AUTO
Temperature adjustment
Use the following steps to program to adjust the main steam boiler and individual group boiler
temperatures individually to offer customized brewing and milk steaming/frothing:
Pro Tip:
Depending on the types/profiles of coffee typically brewed,
it may be useful to set each group at a different temperature
to extract the very best flavour from each espresso.
TEMP GR1 BOILER
96 C
TEMP GR1 BOILER
96 C
Dose programming (Coffee & Tea) using the touchpad
COFFEE DOSING:
This section explains how to program the doses dispensed automatically by the drink buttons:
1. Keep the continuous button pressed over 8 seconds, all the lights in the keypad will light up and
continuous button will flash.
2. Within 30 seconds press any coffee selection that you want to reprogram. Notice that all the lights
will turn off except the selection you made and the continuous button.
3. The group begins to dispense espresso, when the desired volume of espresso is reached, press the
selection button that is light up to stop dispensing, this volume will now be stored as default.
4. Repeat this process with all the selections that needs to be reprogrammed.
In case you only want to reprogram one of the selections, acts as previously described and only
reprogram one selection. The other selections will keep the existing settings.
HOT WATER DOSING:
This section explains how to program the doses dispensed automatically by the drink buttons:
1. Keep the continuous button pressed over 8 seconds, all the lights in the keypad will light up and
continuous button will flash.
2. Within 30 seconds press any hot water selection that you want to reprogram.
3. Press the hot water selection button again to stop dispensing, this volume will now be stored as
default.
4. Repeat this process with all the selections that needs to be reprogrammed.
Note:
Programming any of the options on the left-hand drink buttons (when viewing the machine from
the front) automatically sets the dispensing volumes on all of the other drink buttons. This only
applies to the left-hand drink buttons. Programming other drink buttons only modifies the option
selected.
i
Important:
Use a porta-filter filled with fresh coffee for every new dose you program.
