CPWR-AN26, Rev A, 08-2018
Copyright © 2018 Cree, Inc. All rights reserved.
The information in this document is subject to change without notice.
Cree and Zero Recovery are registered trademarks, and the Cree logo and C3M are trademarks, of Cree, Inc
Table 2: Performance Specifications of
Cree’s CRD
-06600FF10N, 6.6 kW Bi-Directional EV On-Board
Charger (DC/AC Mode)
The main application of Cree’s
CRD-06600FF10N reference design board is the isolated Bi-
Directional EV charging systems, which charges an EV battery when connected to the grid. For
this reference design board, the board must be connected to the resistive load only (specifically
in AC/DC Mode) since a battery charging algorithm is not implemented.
The CRD-06600FF10N reference design board feeds power back into the grid when running in
DC/AC mode and the DC side is connected to a battery or a voltage source greater than 320 VDC.
If the DC input voltage is less than 320 VDC, it does not feed power back into the grid.
η
ƞ
