Creative Conners Stagehand Pro 3, Справочное руководство

Страница: 48 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 42 of 56
374 Overspeed detection level
Inverter shuts down if motor speed
is greater than indicated value. (Hz)
9999 9999 9999
376
Encoder signal loss detection
enable/disable selection Inverter shuts down if encoder stops
working or encoder signal is lost.
1 1 1
414 PLC function operation selection
enable PLC to run brake switching
logic, must be turned off to manually
auto-tune motor
2 2 2
549 Protocol selection MODBUS RTU protocol 1 1 1
550
NET mode operation command
source selection
The RS-485 terminals are the
command source when in the NET
operation mode
1 1 1
551
PU mode operation command
source selection
The RS-485 terminals are the
command
source when in the PU operation
mode.
9999 9999 9999
800 Control method selection
0=Vector control, speed control,
10=Sensorless Vector control,
20=Volts/Frequency control
0 0 0
802 Pre-excitation selection servo lock 1 1 1
818
Easy gain tuning response level
setting 1-15 range that governs aggression
of easy gain-tuning
2 2 2
819 Easy gain tuning selection OFF 0 0 0
820 Speed control P gain 1
pgain level, higher for tighter speed
control but more oscillation
20 20 20
850 Brake operation selection zero speed control 1 1 1
853 Speed deviation time
seconds that an overspeed can
occur before faulting
1 1 1
903
Terminal 2 frequency setting gain
frequency
C4 - Enter the value on the
Stagehand cabinet or refer to the
manual for details on other methods
TBD TBD TBD
Restoring factory VFD settings
There are times when you find yourself in the weeds with a misbehaving Stagehand and nothing you
do seems to make a difference. For me these times generally coincide with changing parameters,