Creative Conners Stagehand Pro 3, Справочное руководство

Страница: 58 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 52 of 56
368 Feedback gain
Response of the feedback will
become slow when the
acceleration/deceleration time is
long. In such case, increase the
setting value
1 1 1
369 Number of encoder pulses
PPR for Vector Control (Floorpocket
pre Jan '19 = 2500) All other
machines = 1024
1024 1024 1024
374 Overspeed detection level
Inverter shuts down if motor speed
is greater than indicated value. (Hz)
9999 9999 9999
376
Encoder signal loss detection
enable/disable selection Inverter shuts down if encoder stops
working or encoder signal is lost.
1 1 1
414 PLC function operation selection
enable PLC to run brake switching
logic, must be turned off to manually
auto-tune motor
2 2 2
549 Protocol selection MODBUS RTU protocol 1 1 1
550
NET mode operation command
source selection
The RS-485 terminals are the
command source when in the NET
operation mode
1 1 1
551
PU mode operation command
source selection
The RS-485 terminals are the
command
source when in the PU operation
mode.
9999 9999 9999
800 Control method selection
0=Vector control, speed control,
10=Sensorless Vector control,
20=Volts/Frequency control
0 0 0
802 Pre-excitation selection servo lock 1 1 1
818
Easy gain tuning response level
setting 1-15 range that governs aggression
of easy gain-tuning
2 2 2
819 Easy gain tuning selection OFF 0 0 0
820 Speed control P gain 1
pgain level, higher for tighter speed
control but more oscillation
20 20 20
850 Brake operation selection zero speed control 1 1 1
853 Speed deviation time
seconds that an overspeed can
occur before faulting
1 1 1