Creative Conners Stagehand Pro 3, Справочное руководство

Страница: 55 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 49 of 56
Position Encoder Input 5VDC (12VDC tolerant) with differential line driver
Encoder Power Supply Voltage 5.5VDC
Increased voltage allows a max of 300’ encoder
cable
Encoder Power Supply Current Rating 2.4A
Control Input 10Base-T Ethernet
Mitsubishi VFD Parameters
YOU MUST SET PARAMETER 77 = 2 PRIOR TO BEGINNING THE MANUAL RESTORE
PROCESS
No. Name Description
5HP
Stock
CM
Chain
Hoist
Floor
Pocket
1 Maximum frequency
Set the upper limit of the output
frequency.
120 110 80
2 Minimum frequency
Set the lower limit of the output
frequency.
0 0 0
3 Base frequency
Set the frequency at the rated motor
torque. (50Hz/60Hz)
60 106 60
7 Acceleration time
Standard time to accelerate a
movement.
0 0 0
8 Deceleration time
Standard time to decelerate a
movement.
0 0 0
9 Electronic thermal O/L relay
Current rating from the motor
nameplate.
17.5 13 17.5
10
DC injection brake operation
frequency Set the frequency at which the
brakes will release.
3 0.5 3
13 Starting frequency
Motor won’t start until the speed
signal is at least this value.
0.5 0.5 0.5
18 High speed maximum frequency
Allows for VFD output at 120Hz or
higher.
120 110 80
30 Regenerative function selection
External brake resistor, L1/L2/L3
power source.
1 1 1
70 Special regenerative brake duty Duty cycle of the braking resistor. 10 10 10
71 Applied motor Other manufacturers' standard 3 3 3