Creative Conners Stagehand Pro 3, Справочное руководство

Страница: 41 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 35 of 56
o
Press the SET button to accept the new value.
● Restart the VFD by either cycling power to the Stagehand, or by pressing the Emergency Stop
button on the Showstopper and release it. Activating the Emergency Stop circuit will remove
power from the VFD.
●
Set the following parameters on the VFD keypad using the same process outlined above:
o
Set Parameter 9 equal to the rated current of the motor. (14A for 5hp)
o
Set Parameter 71 equal to 3. This is the setting for a general purpose motor.
o
Set Parameter 81 equal to the number of motor poles appropriate for the base rpm of
the motor (2 for 3600 rpm, 4 for 1800 rpm, 6 for 1200 rpm).
(4-pole motors are most
common)
o
Set Parameter 83 equal to the rated voltage of the motor. (230V is standard)
o
Set Parameter 96 equal to 1. This will execute auto-tuning without moving the motor.
●
Press the MODE button until the keypad displays a 1 without flashing. You will need to press
the mode button thrice.
● Press and hold the Brake Test button.