Creative Conners Stagehand Pro 3, Справочное руководство

Страница: 46 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 40 of 56
77 Parameter write selection
Allow parameter writes regardless of
operation status.
2 2 2
79 Operation mode selection Keypad disabled, external control. 0 0 0
80 Motor capacity
Kilowatt rating of motor.(1hp=0.75kw,
5hp=3.7kw, 10hp=7kw)
3.7 2.63 4
81 Number of motor poles governs the base rpm of the motor 4 4 4
83 Rated motor voltage
Set the voltage rating from the motor
nameplate.
230 230 230
84 Rated motor frequency
Set the frequency rating from the
motor nameplate.
60 106 60
96 Auto tuning setting/status
Offline auto-tuning status. 0 = not
set; 1 = auto-tuning initiated, 2 =
auto-tuning in progress, 3 = auto-
tuning completed. See Stagehand
Pro manual for instructions
0 0 0
117 PU communication station number
Specifies the inverter station
number.
1 1 1
118 PU communication speed 4800bps 48 48 48
119
PU communication stop bit length /
data length
Data length: 8 bits, stop bit: 1 bit 0 0 0
120 PU communication parity check No parity check. 0 0 0
125
Terminal 2 frequency setting gain
frequency Terminal 2 input gain (maximum)
frequency.
60 106 60
180 RL terminal function selection
general input (used to sense load
brake relay status)
9999 9999 9999
181 RM terminal function selection
general input (used to sense motor
brake relay status)
9999 9999 9999
182 RH terminal function selection
SQ signal, sequence run for PLC
mode. Must be shorted to run, open
to program
50 50 50
183 RT terminal function selection
general input (used to sense load
brake test button)
9999 9999 9999
184 AU terminal function selection
general input (used to sense motor
brake test button)
9999 9999 9999
190 RUN terminal function selection Alarm signal, normally on shuts off if 199 199 199