Creative Conners Stagehand Pro 3, Справочное руководство

Страница: 32 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 26 of 56
Brake Testing
The Stagehand Pro can control two safety brakes for use in hoisting applications. The Stagehand Pro
will internally check the electronic systems to insure the brake circuits are working properly before
releasing either the motor brake or the load brake to prevent dropping a suspended piece of
scenery. However, the Stagehand cannot confirm that the brakes are mechanically operating
correctly.
Since the Stagehand cannot confirm that both brakes are functioning mechanically and that neither
has jammed in a released state (very rare, but possible), nightly pre-show check should include a
brake test. The Stagehand has convenient buttons on the faceplate to assist you with testing the
brakes. To test that your brakes are operating correctly in a hoisting application, read through the
following steps in their entirety and then perform each action as follows:
● Clear the stage below the suspended scenery
●
Press the Brake Test button