Crane Voce Media Скачать руководство пользователя страница 41

Страница: 41 / 116

Technical Manual

cti

- En
gi

’s

A FRESH APPOACH TO VENDING

5.5.8 Cup Drop

This menu option enables the engineer to test the operation of the cup drop unit to
ensure a cup is dropped.

While the test is running the ‘test animation’ accompanied by a Cup Dropping message,

on a successful completion of the test the screen returns to the Test screen.

5.5.9 Display

This menu option enables the engineer to test the LCD display screen.

1. Select Display, the LCD display changes to display a test pattern, revealing any flaw

in the LCD screen.

N.B. To see a correctly displayed test pattern, in full colour, visit the Tech Zone:
website www.cranems.co.uk/technical/

2. When complete, press any touch-key to return to the Test screen.

5.5.10 CoEx Module

This menu enables the engineer to test the operation of the CoEx module components.

While the tests are running the ‘test animation’ accompanied by a Test Started message,
on a successful completion of the test the screen returns to the CoEx Module screen.

5.5.10.1 Home Brewer

Use this option to ensure that the brewer is able to reset and return to the home position.

5.5.10.2 Espresso Valve

Use this option to test the correct operation of the espresso valve.

5.5.10.3 Water Pump 1 and 2

Use this option to test the correct operation of the water pump or pumps as fitted to the
machine.

1. Water will be dispensed from the heater tank during the test sequence. Place a

suitable container under the dispense position and on completion empty the

contents of the container.

Содержание Voce Media





















































































































Результаты поиска

Содержание Voce Media

Отзывы:

Похожие инструкции для Voce Media

Бренды по названию

Популярные бренды

Crane Voce Media, Техническое руководство

Результаты поиска

Содержание Voce Media

Отзывы:

Похожие инструкции для Voce Media

Бренды по названию

Популярные бренды