Crane Voce Media, Техническое руководство

Страница: 13 / 116

Technical Manual 5
Se
cti
o
n
2
- I
n
sta
lla
ti
o
n
A FRESH APPOACH TO VENDING
Section 2 - Installation
Important! It is essential that the personnel responsible for installing and
servicing your machine, understand the following:
1. The installation and commissioning of your machine should only be carried out by a
trained and authorised service technician.
2. All water and electrical services must be correctly and safely connected.
3. All covers must be replaced correctly and securely and your machine left in a safe
condition.
2.1 Installing your Machine
1. Your machine is only suitable for indoor use, we recommend that it be situated in
an area with an ambient temperature not below 10º C and not exceeding 30º C.
Your machine should be located near the appropriate water and electrical services,
refer to Section 1.1 Specifications.
2. Prior to placing your machine in its final location, ensure that there is sufficient
access space available via passageways, stairs, lifts, etc.
3. To ensure adequate ventilation, 100 - 150 mm (4 - 6 inches) clearance must be
allowed between the back of the cabinet and the wall.
4. Open the door using the key provided. Remove transit packing and installation kit.
Check for visual signs of damage which may have occurred during transit. If your
machine is damaged or any parts are missing, you must contact the supplier
immediately.
5. Level your machine in both the front-to-back and side-to-side planes by adjusting
the feet. Ensure that the door opens and closes easily and the lock operates
correctly.
2.2 Connecting the Water Supply
1. Your machine should be situated within 1 metre of a drinking water supply from a
rising main, terminating with a W.R.C. approved 15mm compression stop-tap.
N.B. The water supply should comply with both the Statutory Instrument
No.1147 - “Water, England and Wales” and The Water Supply (Water Quality)
Regulations 1989. Water pressure at the stop-tap must be within the limits 2 - 6 Bar
(200 Kpa - 600 Kpa).
2. Freshbrew & B2C Machines: VOCE Media machines fitted with a paperless
freshbrew brewer or CoEx® brewer must be connected to the water supply via a
water filter. This filter must be of food grade quality and able to remove temporary
hardness (scale), heavy metals (lead, copper, iron, cadmium), chlorine and any
organic pollutant’s/discolouration .
Warning! If your Freshbrew or B2C machine is connected to a water supply and
used without a water filter as specified above, your warranty will be void.