Crane Barnes Simplex OGV Series, Руководство по установке

Страница: 13 / 25

13
STEP 5.
Remove Parts Box from Basin, Attach Rope to Pumps,
Record Pump Data
STEPS & TIPS:
Remove Parts Box from inside basin. It should contain
the following items
• Lifting device, inlet fitting and vent (If required)
• Remove Connector Protectors From Cord and Pump.
• Record pump information on user guide for future
reference.
• Attach lifting device to pump.
1. Make a small overhand loop in the rope.
2. Bring the short end through the overhand loop.
3. Place short end behind the fixed part of the rope.
4. Bring end around and back into the loop.
5. Pull on the fixed end of the rope away from the loop
to tighten the knot.
• Plug Cord Into Pump As Shown Below.
NEVER LOWER OR RAISE PUMP BY THE CORD!
• Secure pump base with hardware provided.
• Assemble pipe and check valve to pump and secure
with bracket and u-bolt.
• Attach Alarm Float to Mounting Clip Inserted Between
Zip Ties On The Float Cable.
FIGURE 9
For Illustration Purposes Only.