Crane Merchandising Systems BevMAX 4 Series, Техническое руководство

Страница: 24 / 105

23 of 97
Press key number 2 or 3 to scroll through the override
routines available. Press key number 1 to return to
“Over-ride Switch”.
“Free Vend #”
- Free Vend Enable Routine
This function is used to set the vender to free
vend. 0 = disable, 1 = enable. Press key number
4 and “#” will start flashing. Press key number 2
or 3 to scroll between “Free Vend 0” and “Free
Vend 1”. Press key number 4 with the display
blinking the setting you wish to use. Display will
return to “Free Vend #”. Press key number 2 to
scroll to “No Vend #”.
“No Vend #”
- No Vend (Vend Override) Enable
Routing
This function is used to set vender selections
to not be allowed to vend and a “No sales
available” message to be displayed. 0 =
disable, 1 = enable. Press key number 4 and
“#” will start flashing. Press key number 2 or 3
to scroll between No Vend 0 and No Vend 1.
Press key number 4 with the display showing
the setting you wish to use. Display will return
to “No Vend #”. Press key number 2 to scroll
to “Sales Block #”.
“Sales Block #”
- Selection Blocking Override
Routine
This function is used to override “Select Block
1” and “Select Block 2” if they are being used.
“Sales Block 0” is disabled, “Sales Block 1” is
enabled. Press key number 4 and “#” will
start flashing. Press key number 2 or 3 to
scroll between “Sales Block 0” and “Sales
Block 1”. Press key number 4 with the display
blinking the setting you wish to use. Display
will return to “Sales Block #”. Press key
number 2 to scroll to “Discount #”.
“Discount #”
- Discounting Override Routine
This function is used to override “Select
Discount” if it is being used. “Discount 0” is
disabled and “Discount 1” is enabled.
Press key number 4 and “#” will start flashing.
Press key number 2 or 3 to scroll between
“Discount 0” and “Discount 1”. Press key number
4 with the display showing the setting you wish to
use. Display will return to “Discount #”. Press
key number 2 to scroll to “Lighting #”.
“Lighting #”
- Lighting Control Override Routine
This function is used to override “Lighting
Control” if it is being used. “Lighting 0” is
disabled and “Lighting 1” is enabled.
Press key number 4 and “#” will start flashing.
Press key number 2 or 3 to scroll between
“Lighting 0” and “Lighting 1”. Press key number 4
with the display blinking the setting you wish to
use. Display will return to “Lighting #”. Press key
number 2 to scroll to “Refrigeration #”.
“Refrigeration #”
- Refrigeration Control
Override Routine
This function is used to override “Refrigeration”, if
it is being used. “Refrigeration 0” = disabled and
“Refrigeration 1” = enabled. Press key number 4
and “#” will start flashing. Press key number 2 or
3 to scroll between “Refrigeration 0” and
“Refrigeration 1”. Press key number 4 with the
display showing the setting you wish to use.
Display will return to “Refrigeration #”. Press key
number 1 to return to “Over-ride Switch”. Press
key number 2 to scroll to “Remote Vend Mech”.
“Remote Vend Mech” - REMOTE VEND
MECHANISM ROUTINE
This function is used to activate the Universal Satellite
Device Control routine. Press key number 4 to enter
routine. If the controller detects a device responding to
the remote vend mechanism address (USD address
#3,50H), the vend request commands for this device
will be controlled by the following parameters.
“Start Time“
- Start Time Setting Routine
This function is used to set the day(s) and time to
start the routine. Press key number 4 and “Star
Day” will show on the display.
“Start Day”
- Day of week to start setting
Set this feature using instructions for “Select
Block 1”, “Start Time”, “Start Day”.
“Start Hour”
- Start hour and minute settings
Set this feature using instructions for “Select
Block 1”, “Start Time”, “Start Hour”.
“Stop Time”
- Stop Time Setting Routine
This function is used to set the day(s) and time to
stop the routine. Press key number 4 and “Stop
Day” will show on the display.
“Stop Day”
- Day of week to stop setting
Set this feature using instructions for “Select
Block 1”, “Stop Time”, “Stop Day”.
“Stop Hour”
- Stop hour and minute settings
Set this feature using instructions for “Select
Block 1”, “Stop Time”, “Stop Hour”.
“Selection”
- Selection Setting Routine
This feature is used to set the selection(s) which
will be affected by the Remote Vend Mechanism
routine. Press key number 4 and “Select A1 #” will
be displayed, where # is the current setting for the
selection number displayed. 0 = disabled, 1 =
enabled. Press key number 2 to scroll to the select
button number you desire to change. Press key
number 4 with the select button number showing
you wish to change (i.e. Select A1 #) and the # will
start blinking. Press key number 2 or 3 to scroll
between “Select A1 0” and “Select A1 1”. Press key
number 4 with the display showing the setting you
wish to use. Display will return to “Select ## #”.
Press key number 1 to return to “Selection”. Press
key number 2 to scroll to “Vend Rate”.
“Vend Rate”
- Universal Satellite Device (USD)
Vend Rate Routine This function is used to set the
vend rate (0-255). Press key number 4 and the
current vend rate (0-255) will show on the display.