Crane Merchandising Systems BevMAX 4 Series, Техническое руководство

Страница: 21 / 105

20 of 97
Press key number 2 or 3 to scroll between
Degrees F and Degrees C. Press key number
4 with the display blinking the setting you wish
to use. Press key number 1 to return to
“Degrees”.
Press key number 2 to scroll to “Setpoint”.
“Setpoint”
- Set Point Control Routine (Default
Temperature 35.0
0
F)
This function is used to set the average product
temperature for initial pull down and reload
recovery. Press key number 4 and “tt.tx” will
show on the display where x is F (Fahrenheit)
or C (Celsius) and tt.t is the degrees.
Press key number 2 to increase or 3 to
decrease the number by 1
0
F or 0.5
0
C. With
the display showing the set point temperature
you wish to use, press key number 4.
Press key number 2 to scroll to “Storage”.
“Storage”
- Storage Setting Routine (Default
Temperature 60.0
0
F / 15.5
0
C)
This function is used to set the temperature for
product storage and is used when Energy
Conservation is enabled. Press key number 4
and “tt.tx” will show on display when X is F
(Fahrenheit) or C (Celsius) and tt.t is the
degrees. Press key number 2 to increase and
3 to decrease the number by 1
0
F or 0.5
0
C.
With the display showing the storage setting
you wish to use, press key number 4. Press
key number 2 to scroll to “Display X”.
“Display #”
- POS Temperature Display
Enable Routine
This function is used to enable the POS
Temperature to be displayed following the
“Ice Cold COCA-COLA” POS message.
Press key number 4 and “ Display X” will show
on the display where x is the current setting.
With “X” blinking, press key number 2 or 3 to
scroll between “Display 0” disabled or not
displayed and “ Display 1” enabled or
displayed. With the display showing the
setting you wish to use, press key number 4.
Press key number 1 to return to
“Refrigeration”. Press key number 2 to scroll
to next routine.
*”Select Block 1" - BLOCK SELECTION
BANK 1 ROUTINE (Config 2 must be
enabled – Config 2 1)
This function is used to set selections which will be
blocked during certain periods of the day. Press key
number 4 will enter “Enable X”.
“Enable X”
- Blocking Enable Routine
This function is used to disable blocking “Enable 0”
or enable blocking “Enable 1”. When enabled,
active selections will not be allowed to vend on the
days and times programmed. Press key number 4
and the current “Enable” setting will be displayed.
Press key number 2 or 3 to scroll between “Enable
0” and “Enable 1”. Press key number 4 with the
display blinking the setting you wish to use. Display
will return to “Enable X”. Press key number 2 to
scroll to “Start Time”.
“Start Time”
- Start Selection Blocking Routine
This function is used to set the day(s) and time to
start selection blocking. Press key number 4 and
“Start Day” will show on the display.
“Start Day”
- Day of Week Start Setting
This function is used to set the day(s) of the week
to start selection blocking. Press key number 4
and “XXXXXX#” will show on the display, where
XXXXXX will be the day of the week (i.e.
Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday, Sunday, Every day) and # is 0
= disable, 1 = enable. With the display showing
the day you wish to set press key number 4. The
# will start blinking. Press key number 2 or 3 to
scroll between “XXXXXX0” and “XXXXXX1.”
Press key number 4 with the display showing the
setting you wish to use. Display will return to
“XXXXXX#’. Press key number 2 to scroll to the
next day to set or press key number 1 to return to
“Start Day”. Press key number 2 to scroll to “Start
Hour”.
“Start Hour”
- Start Hour and Minute Setting
This function is used to set the hours and
minutes to start selection blocking. Press key
number 4 and “hhmm” will show on the display,
where hh is the hour (military time) and mm is the
minute. “hh” will be blinking, indicating the hour
setting may be changed. Press key number 2 to
scroll from 00 to 23. With the display showing the
hour you wish to start selection blocking, press
key number 4. “mm” will then start blinking,
indicating the minute setting may be changed.
Press key number 2 to scroll from 00 to 59. With
the display showing the minute you wish to start
selection blocking, press key number 4. The
display will return to “Hour”. Press key number 1
to return to “Start Time”. Press key number 2 to
scroll to “Stop Time”.
“Stop Time”
- Stop Selection Blocking Routine
This function is used to set the day(s) and times to stop
selection blocking. Press key number 4 and “Stop Day”
will show on the display.
“Stop Day”
- Day of Week Stop Setting
This function is used to set the days of the
week to stop selection blocking and can be
set in the same manner as Day of Week
Start Setting.
“Stop Hour”
- Stop Hour and Minute Setting
This function is used to set the hours and
minutes to stop selection blocking and can be
set in the same manner as Start Hour and
Minute Setting.
Press key number 1 to return to “Stop Time”.