Crane Merchandising Systems BevMAX 4 Series, Техническое руководство

Страница: 15 / 105

14 of 97
this time will scroll through the available selection vend
counters. Example: Display flashes “Sales Sel A1” then
“145”. This is 145 interval vends counted for selection
A1. Pressing key number 1 will return to “Sales
Tot”/”########”. Press key number 1 to return to
“Sales Counter”. Press key number 2 to scroll to the
next routine.
“Price Mode”- This function will only
display if “EXE” is turned on in the “Coke
Factory Setup” mode
.
This function is used to set the price mode to either
VMC holding the prices or the EXE Coin Mech holding
the prices. Press Key 4 to enter menu. The current
setting is displayed as “Price Holding: On” or “Price
Holding Off”. Press key 2 to select the desired price
mode On or Off. Press key 4 to confirm setting. Press
key 1 to exit menu.
Note
: If Price mode is set for “Price Holding”, then the
Price Program will allow the user to set the price lines
for each selection. It will operate the same as setting
prices, except the user will be prompted to set a price
line rather than a price.
“Price Program” - PRICE SETTING
ROUTINE
This function allows the user to set pricing. When
Configuration Code 1 is programmed to “Config 1 0”
the vender is set for single price vending. When
Configure Code 1 is set to “Config 1 1”, the vender is
set for multi-pricing (or a price for each selection needs
to be set). Note: This routine is lockable when using a
data collection device.
Single Price price setting:
Press key number 4 “Single Price” will show on
display. Press the ”4” key and “Price Sel #.## will
show on display. Press key “2” to increase the
vend price or key “3” to decrease the vend price.
With the display showing the vend price you
require, press key “4” to save. All selections will
be set to vend at the saved vend price.
Multiprice price setting:
Press key 4 and display will show “All Selections”.
Press key 2 to scroll from “All Selections” to
individual tray selections “A, B, C, D, E”. With the
display showing the All settings of the tray you
wish to set price in press the key 4 to enter. At “All
Selections” when you press 4 and enter the
display will show “#.##” or current price set. Press
key “2” to increase the vend price or key “3” to
decrease the vend price. With the display
showing the vend price you require, press key “4”
to save. If you select an individual tray letter to set
price in, when you press 4 and enter the display
will show “All Selections (for tray A only)”. Press
key 2 to scroll to A1 thru A9 then back to All
Selections (for A tray only)”. At the position you
wish to set price when you press 4 and enter the
display will show “#.##” or current price set. Press
key “2” to increase the vend price or key “3” to
decrease the vend price. With the display
showing the vend price you require, press key “4”
to save.
Factory default setting is “Single Price”. Press key
number 1 to return to “Price Program”. Press key
number 2 to scroll to the next routine.
Price line setting:
This function will only display if Price Holding: On” is
set. It will operate the same as setting prices except
the user will be prompted to set a price line rather
than a price.
IMPORTANT
: If Enable Snack Vender is set to
“1” or on the vender must be set for Multiprice
price setting. When scrolling through to select
where to set prices you will see the following;
“All Drink Selections, A, B, C, D, E, and then All
Snack Selections. At “All’ Snack Selections”
Press key 2 to scroll from “All Snack Selections” to
individual tray selections “21, 22, 23, 24,25, 26”.
With the display showing the setting of the tray you
wish to set price in press the key 4 to enter. At
“All’ Selections” when you press 4 and enter the
display will show “#.##” or current price set. Press
key “2” to increase the vend price or key “3” to
decrease the vend price. With the display
showing the vend price you require, press key “4”
to save. If you select an individual tray number to
set price in, when you press 4 and enter the
display will show “All Selections (for tray 21 only)”.
Press key 2 to scroll to 211 thru 21# then back to
All Selections (for 21 tray only)”. At the position
you wish to set price when you press 4 and enter
the display will show “#.##” or current price set.
Press key “2” to increase the vend price or key “3”
to decrease the vend price. With the display
showing the vend price you require, press key “4”
to save.
“View PL Assignments”- This function
will only display when EXE in the
“Coke Factory Setup” is turned on.
This function allows the user to see which
selections are assigned to which price lines. Even
if price holding is turned off, this menu will show
what the price line assignments will be when price
holding mode is enabled. To enter this menu press
key 4. Press key 2 to scroll through the price lines
0-100. Press key 1 to exit menu.
“View PL Value”- This function will
only display when EXE in the “Coke
Factory Setup” is turned on.
This menu allows the user see the value of each
Price line held by the EXE coin mech. In order to