Craftmade Trevor, Руководство по установке

Страница: 13 / 28

page 13
14. Testing Your Fan.
13. Smart Ceiling Fan Wi-Fi Control.
(Optional)
(cont.)
10 . Specific information about your fan:
-Select “ Location ” and choose from one of the predefined entries or add your own by selecting
“ OTHER ”. When finished, select “ Save ”.
- Select device name and enter the name for your device. When finished, select “ OK ” to save.
PLEASE NOTE : This name will be used for integrations so a simple, easy-to-remember name is best.
11 . Select “ Continue ”.
12 . Select the Wi-Fi network you would like to connect the SBB to.
13 . Enter the Wi-Fi password and select “ OK ”.
14 . If there is an issue with the connection or wrong password is entered, you will receive an error
message. Select “ OK, I’ve Got It ”.
15 . Once the connection is made, select “ DONE ”.
16 . If the SBB fan is not displayed in the Bond application, swipe down to refresh.
For assistance at any time during this process, go to the “ Help ” section of the app:
- Tap on “ Settings ”
- Tap on “ Help Center ”
- Choose “ Open a Ticket ” or “ Live Chat ”
motor
housing
reverse
switch
diagram 1
diagram 2 diagram 3
It is recommended that you test fan before finalizing
installation. Restore power from circuit box and light
switch (if applicable). Test wall control (optional
installation) by locating ON/OFF slider switch on
wall control, then set to the ON position. Test light
and then test fan speeds. Next, locate handheld remote
control. Test the light ON/OFF function by pressing the
L button. Test fan speeds with the different fan speed
buttons. If the wall and/or handheld remote control
operate(s) all of the functions of the fan and light,
battery/batteries has (have) been installed correctly.
If the wall and/or handheld remote control do (does)
not operate all of the fan/light functions, refer to
"Troubleshooting" section to solve any issues before
contacting Customer Service.
Turn fan completely off before moving the reverse
switch (located on top of motor housing). Set reverse
switch to recirculate air depending on the season:
- LEFT position in summer (diagram 1)
- RIGHT position in winter (diagram 2)
A ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat setting
in winter without feeling a difference in your comfort.
Important: Reverse switch must be set either
completely LEFT or completely RIGHT for fan to function.
If the reverse switch is set in the middle position
(diagram 3), fan will not operate.
NOTE: If the wall control/handheld remote control
interferes with other appliances, turn off power first
and then go back to the instructions in Section 11,
page 11 .