page 8
metal cover
10. Handheld Remote Control Assembly.
IN ORDER TO USE THE HANDHELD REMOTE
CONTROL, PLEASE CONTINUE WITH SECTION 10 for
remote control assembly instructions. If you have
already installed the wall control but do
not
wish to
use the handheld remote control, please proceed to
Section 11.
Gently pull on remote control cover to separate
top and bottom parts.
[
Refer to
diagram 1
.
]
[”Handheld Remote Control Assembly"
continued on next page.]
(top)
(bottom)
remote
control
cover
diagram 1
9. Light Kit Assembly (Optional). (cont.)
Remove 1 screw from post located on underside of
fitter plate and partially loosen the other 2 screws on
the other 2 posts.
Connect male plug from LED light kit to female plug
from motor housing, matching up the colors on the
male plug with the colors on the female plug for
correct fit. Be sure that plugs connect securely.
Arrange wires carefully within fitter plate. Align
slotted holes in LED light kit with loosened screws in
fitter plate. Twist the LED light kit to lock. Re-insert
screw that was previously removed and securely
tighten all 3 screws.
Align grooves on glass shade with nodules inside of
LED light kit and push up gently on glass shade. Twist
glass shade to the RIGHT (clockwise) until glass shade
no longer turns.
Pull down VERY GENTLY on glass shade to make sure that
glass shade is secure.
If you do NOT wish to use the light kit
, remove 1
screw from motor plate on underside of motor
housing and partially loosen the other 2 screws. Align
slotted holes in the metal cover plate with loosened
screws in motor plate. Twist metal cover plate to lock.
Re-insert screw that was just removed and securely
tighten all 3 screws with a Phillips screwdriver.
Locate
nodules on metal cover plate and align with long
grooves on metal cover. Gently push up on metal
cover and turn to the
RIGHT (clockwise)
until it no
longer turns.
[
Refer to
diagram 3
.
]
CAUTION
: D
o
not
install the LED light kit or connect
the male and female plugs if you do NOT wish to use
the light kit.
female plug
fitter plate
male plug
LED light kit
glass shade
metal cover plate
motor housing
motor plate
