page 10
12. Remote Control Operation.
ON/OFF
-
turns wall control ON or OFF
slider switch
(switch not functional on handheld
remote)
HIGH
button -
turns
fan
to HIGH speed
MED
button -
turns
fan
to MEDIUM speed
LOW
button -
turns
fan
to LOW speed
OFF
button
-
turns
fan
OFF
L1
button
-
(not applicable for this fan)
L2
button
-
turns
light kit
ON/OFF when pressed once
REV
button
-
used to REVERSE blade direction (fan must
be set on
low
before
reversing blade
direction)
1
1
-
2
2
-
wall control
1
1
-
2
2
-
handheld
remote control
13. Testing Your Fan.
1
1
-
2
2
-
1
1
-
2
2
-
It is recommended that you test fan before finalizing
installation. Restore power from circuit box. Test wall
control (optional installation) by locating ON/OFF slider
switch on wall control, then set to the ON position. Test fan
speeds. Next, locate handheld remote control. Test fan
speeds with the different fan speed buttons. If the wall
and/or handheld remote control operates all of the
functions of the fan, battery has been installed correctly. If
the wall and/or handheld remote control do (does) not
operate all of the fan functions, refer to "Troubleshooting"
section to solve any issues before contacting Customer
Service.
Fan
must
be on LOW
before
setting the fan to reverse
direction. Use "reverse" (REV) button to recirculate air
depending on the season.
NOTE
: If the wall control/handheld remote control
interferes with other appliances, turn off power and go
back to the instructions in Section 11.
