page 8
8. Automated Learning Process./Activating Code.
Install 12-volt battery (provided) in transmitter and wall control (if applicable).
IMPORTANT
: Store the transmitter away from excess heat or humidity. To prevent damage to transmitter,
remove the battery if not used for long periods.
FAN
SPEED,
Buttons
1-6
:
Use to control the ceiling fan speed 1-6.
REVERSE
:
Use to control fan direction.
LEARN
button
:
Turn fan power on. Within 30 seconds of powering fan,
press and hold
LEARN
button on remote control and/or wall
control for 5 seconds (or until fan beeps twice) in order to
synchronize remotes with fan motor.
FAN OFF:
Use to turn fan off.
ON
/
OFF
slider switch:
[
Wall control only
] Use to turn wall control on or off.
Select faceplate for remote control and/or wall control and press firmly onto front of remote control/wall
control.
IMPORTANT
:
The Automated Learning Process takes 5 minutes to complete. Please leave the fan “on”
for the duration of the 5-minute programming and do not use the remote control
during this time.
REMOTE
CONTROL
FAN OFF
REVERSE
1
2
3 4
5
6
1
2
3
4
5
6
LEARN
WALL
CONTROL
FAN OFF
REVERSE
ON/OFF
SLIDER
SWITCH
LEARN
FAN SPEED
FAN SPEED
LED LIGHT
LED LIGHT
12V
IMPORTANT:
Remote and wall
controls must be
S NC R ONI E with
fan in order to
properly function.
12V
