page 10
13. Testing Your Fan.
It is recommended that you test fan before finalizing
installation. Locate ON/OFF slider switch on wall control
and set to the ON position. Test light and dimmer
function and then test fan speeds. Next, locate remote
control. Start with the lights OFF and test the light
ON/OFF function by pressing on the button. Test the
dimmer function by pressing the button and holding
it down for more than 2 seconds. Test fan speeds with
the different fan speed buttons. If the remote control
operates all of the functions of the fan, battery has been
installed correctly. If the wall and/or remote controls do
(does) not operate all of the fan functions, refer to
"Troubleshooting" section to solve any issues before
contacting Customer Service.
Fan
must
be on LOW
before
setting the fan to reverse
direction. Use REV button to recirculate air depending on
the season.
NOTE
: If the remote control interferes with other
appliances, change code switches on the transmitter
(AND wall control) to another code. If you do change the
code,
turn power off first
, remove the battery cover, and,
after setting the new code, go back to the instructions in
the last paragraph of Section 7 (page 7).
12. Remote Control Operation.
HI
button - turns
fan
to HIGH speed
MED
button - turns
fan
to MEDIUM speed
LOW
button - turns
fan
to LOW speed
button - turns
fan
OFF
button - used to REVERSE blade direction (fan
must be turned
low
before
reversing blade direction)
button - pushing button turns
light
ON/OFF; pressing button and holding it down for
more than 0.7 seconds converts it into a dimmer
11. Wall Control Operation.
ON/OFF slider switch
- turns
wall control
ON or OFF
HI
button - turns
fan
to HIGH speed
MED
button - turns
fan
to MEDIUM speed
LOW
button - turns
fan
to LOW speed
FAN OFF
button - turns
fan
OFF
REV
button - used to REVERSE blade direction (fan must be set
on
low
before
reversing blade direction)
LIGHT
button -
(for use with optional light kit)
turns
light
ON/OFF when pressed once; dims
light
when pressed and held
down.
