Coyote Point Systems Equalizer, Руководство по установке и администрированию

Страница: 67 / 144

Saving or Restoring Your Configuration
Equalizer Installation and Administration Guide 57
Changing the Administration Passwords
To change the view or edit passwords:
1. Log into the Equalizer Administration interface with edit access.
2. Select Configure Change Passwords from the Equalizer menu in the main menu bar.
The Change Equalizer Parameters dialog is displayed in the right frame. By default,
the Passwords tab is visible:
Figure 40 Changing administration passwords
3. Select the password you want to change: View Password or Edit Password.
4. Enter the current password in the Current Password field.
5. Enter the new password in the New Password field and then confirm it by entering it
again in the Confirm New Password field.
6. Click the Set button.
Saving or Restoring Your Configuration
You can use the Backup/Restore Configuration command to save your Equalizer
configuration to a file, or load a saved configuration.
Backing Up Your Configuration
To save your current configuration to a file:
1. Log into the Equalizer Administration interface with edit access.
2. Select Configure Backup/Restore Configuration from the Equalizer menu in the main
menu bar. The Backup/Restore Equalizer Configuration dialog is displayed in the
right frame.
Note – Both the View Password and Edit password may be changed by an administrator logged
in with Edit access. If you are logged in with Edit access, you can change the View password
without specifying the current password. If you have lost or forgotten the edit mode password, it
can be set through the Equalizer Configuration Utility. See “Changing the Administration Interface
Password” on page 27.