Coyote Point Systems Equalizer, Руководство по установке и администрированию

Страница: 48 / 144

Chapter 4:Administering Equalizer Operation
38 Equalizer Installation and Administration Guide
Displaying Equalizer Information
The Equalizer Global Parameters display information about Equalizer’s operation modes
and overall connection statistics.
To display the global parameters:
1. Log into the Equalizer Administration interface with view or edit access.
2. In the left frame, click the Equalizer entry at the top of the column. The Equalizer
parameters and status information are displayed in the right frame. You can also
display this information by selecting Global Parameters from the View menu in the
main menu bar.
Figure 22 Viewing Equalizer information
This view displays the current Equalizer configuration and Equalizer’s operational status.
The Equalizer parameters section shows the following information:
■
Equalizer Version—the version of the Equalizer software that’s currently running.
■
External Address—the IP address configured as Equalizer’s external address.
■
Internal Address—the IP address configured as Equalizer’s internal address.
■
Stale Connection Timeout—the number of seconds before a stale connection will be
dropped.
■
Passive FTP Translation—indicates whether PASV FTP mode is enabled or disabled.
■
Failover mode—indicates whether the Equalizer is operating as a primary or backup
unit.
■
Envoy Geographic Load Balancing—indicates whether geographic load balancing is
currently enabled.
The status section displays the following information:
■
Total connections Processed—the number of connections processed in the last second.
■
Peak Connections Processed—the peak number of connections processed per second
since Equalizer was started.
■
Connections Timed Out—the number of connections that have timed out.