Coway BAS25-AMY, Руководство пользователя

Страница: 26 / 36


Use a soft cloth or sponge with a neutral detergent to
clean the bidet.
- Failure to do so may result in product deformation or damage.
Tips
Do not use a thinner, benzene, detergents with abrasives or rough scrubbers on the
product.
Make sure to follow the above instructions as, unlike other surfaces, the seat is highly
susceptible to scratches and rough scrubbers can scratch or peel the surface.
Do not apply excessive force when cleaning the nozzle as it may break.
Do not drop or apply force to the remote control.
Do not drop the remote control in water or use water to clean it.
Disconnect the power plug from the electrical outlet when removing and
cleaning the nozzle/drying duct.
The nozzle/drying duct can be washed with water, but it must be completely
dry before reassembling.
The product body and the remote control should never be cleaned using water.
Clean the product body
Removing the nozzle duct
- Hold the end of the duct as shown in the image and separate
using an upward and downward motion.
- Be cautious to prevent the duct from falling into the toilet.
Removing the drying duct
- Remove the drying duct in the directions as shown in the image.
CLEANING