Coway BAS25-AMY, Руководство пользователя

Страница: 18 / 36

CHOOSING THE DESIRED CLEANSING
For front cleansing

Front cleansing
Sit down on the bidet and press the Front Cleansing button on the remote control.
- The front nozzle drains cold water in the nozzle, before water is sprayed so cleansing
can be done at a warm temperature.
- Cleansing water will spray for 1 minute and stop automatically.
- When the nozzle retracts, the nozzle gets cleaned automatically for 6 seconds.
* Press the Move button to adjust the position of the nozzle.
* Press the Front Cleansing button again while in operation for an additional
minute of cleansing.
* You can adjust the warm water temperature, water pressure and nozzle position
according to your preference.

Move
Sit down and press the Move button on the remote control.
- The nozzle moves back and forth to cover a wide area.
* This continues while the cleansing function is being used.
* Press the Move button to adjust the position.
* Press the Move button once again to stop the nozzle.
 Stop
Press this button to stop all currently operating functions.
- All current operating functions stop.
* The dry function stops 2 seconds after the Stop button is being pressed.
 Dry
Sit down and press the Dry button on the remote control.
- Warm air is emitted for 2 minutes to dry the wet areas.
* Wipe the wet area lightly before using dry feature to speed up drying.
* Press the Warm Water/Air Temperature
button to adjust air temperature.
* Press the Dry button again during use to add an additional 2 minutes of drying.
* If you press the Dry button while cleansing, cleansing function stops so you can
start drying immediately.