Coway BAS25-AMY, Руководство пользователя

Страница: 22 / 36

INSTALLATION
6. Connect the filter to the back of the bidet and use the
filter clip to fit it in place.
Check whether the filter clip is in place.
If it is not, the filter fixing stopper may be released from the product
when you open the main water supply valve. This can cause leakage and
possible injury.
8. Open the valve for the main water supply.
Grounding
terminals
9. Connect the power plug to an electrical outlet.
* The product should be connected to a grounded outlet only. Using a grounded
outlet reduces the risk of electric shocks if an electrical short circuit occurs.
Connect the power plug to a grounded outlet dedicated for the product.
If unavoidable, use an extension cord with grounding terminals for 250V,
16A or higher.
7. Connect the bidet hose to the filter fixing stopper and the |
T-shaped connector.
* The bidet hose needs to be as short as possible.
If it is too long, it may become a source of noise.
4. Place the fixing slider over the installation plate on the toilet,
insert the fixing bolts, and fasten the nuts so that the installation
plate is fixed.
5. Match the back of the product to the installation plate, by pressing
the button down. (Hold the bidet body with both hands and push
until it clicks into place).
If the bidet is not securely fitted, retighten the nuts.